{"product_id":"hunter-mini-clik-wired-rain-sensor","title":"Hunter Mini-Clik® Wired Rain Sensor with Adjustable 1\/8 to 3\/4 in. Rainfall Shutoff, 25 ft Wire, and Aluminum Mount","description":"\u003cp\u003eStop wasting water on rainy days — the Hunter® Mini-Clik® rain sensor pauses your irrigation controller the moment accumulated rainfall hits the threshold you set, and lets it resume on its own once the discs dry out. It’s the simplest rain sensor Hunter sells: hard-wired with 25 ft of UL-approved sprinkler control wire, an aluminum extension arm to keep the sensor in open sky, and a rugged polycarbonate housing that holds up in the elements for years.\u003c\/p\u003e\u003ch3\u003eWhy Irrigation Pros Pick the Mini-Clik\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable shutoff threshold — 1\/8 in. to 3\/4 in. of accumulated rainfall, set with a twist of the cap\u003c\/li\u003e\n\u003cli\u003eDebris tolerant — reliable operation without nuisance shutdowns from leaves, dust, or insect intrusion\u003c\/li\u003e\n\u003cli\u003eHard-wired install — 25 ft (7.5 m) of 20 AWG sheathed, two-conductor, UL-approved wire shipped with the sensor\u003c\/li\u003e\n\u003cli\u003eAluminum mounting bracket included — clamps to a fence post, gutter, or eave with the sensor held in open sky for accurate rainfall reading\u003c\/li\u003e\n\u003cli\u003eRugged polycarbonate housing with metal extension arm — rust-resistant and built for buried-eave or full-sun service\u003c\/li\u003e\n\u003cli\u003eCompatible with most Hunter and third-party controllers — any 24 VAC controller with a normally open or normally closed sensor \/ rain-switch input\u003c\/li\u003e\n\u003cli\u003eReset behavior: approximately 4 hours under dry, sunny conditions after a rain event; up to ~3 days when fully saturated\u003c\/li\u003e\n\u003cli\u003e5-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere It Shines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNew residential or light-commercial irrigation builds where the controller cabinet is close enough to run sensor wire to a fence or eave\u003c\/li\u003e\n\u003cli\u003eService calls swapping a failed rain sensor on an existing Hunter Pro-C, X-Core, X2, or I-Core system — same SENS terminal wiring\u003c\/li\u003e\n\u003cli\u003eMunicipal water-conservation programs that mandate a rain shutoff on every irrigation system\u003c\/li\u003e\n\u003cli\u003eRetrofitting an older controller that has a SENS input but no current sensor wired in — Mini-Clik is the lowest-cost path to compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel number: MINI-CLIK\u003c\/li\u003e\n\u003cli\u003eType: hard-wired rain sensor, normally closed default\u003c\/li\u003e\n\u003cli\u003eRain sensitivity: adjustable from 1\/8 in. to 3\/4 in. of accumulated rainfall\u003c\/li\u003e\n\u003cli\u003eSwitch rating: 3 A @ 24 V ac\u003c\/li\u003e\n\u003cli\u003eWire: 25 ft (7.5 m) of 20 AWG sheathed, two-conductor, UL-approved\u003c\/li\u003e\n\u003cli\u003eSensor type: hygroscopic disc stack\u003c\/li\u003e\n\u003cli\u003eReset time after rain: ~4 hours dry \/ sunny; up to ~3 days fully saturated\u003c\/li\u003e\n\u003cli\u003eHousing: rugged polycarbonate with metal extension arm\u003c\/li\u003e\n\u003cli\u003eMounting: aluminum bracket (included) — gutter, fascia, fence post, or eave\u003c\/li\u003e\n\u003cli\u003eApprovals: UL, cUL, FCC, CE, RCM\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eUPC: 611698113301\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMini-Clik rain sensor with hygroscopic disc cap\u003c\/li\u003e\n\u003cli\u003eAluminum mounting bracket and extension arm\u003c\/li\u003e\n\u003cli\u003e25 ft (7.5 m) of 20 AWG two-conductor UL-approved sheathed wire (pre-attached)\u003c\/li\u003e\n\u003cli\u003ePrinted install reference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWiring — Quick Overview\u003c\/h3\u003e\u003cp\u003eTwo color-coded leads from the sensor connect to the controller’s SENS terminal pair (Hunter controllers) or break the valve common on controllers without a dedicated sensor input. The default switch state is \u003cstrong\u003enormally closed\u003c\/strong\u003e — current flows in dry weather and the controller waters normally; when rainfall trips the disc stack, the switch opens and the controller treats the sensor as “active”, suspending the schedule. A normally-open variant ships as MINI-CLIK-NO if your installation needs reverse-polarity logic.\u003c\/p\u003e\u003ch3\u003eCompatible Controllers\u003c\/h3\u003e\u003cp\u003eThe Mini-Clik works with every modern Hunter controller, including ACC, ACC2, HC, HCC, HPC, I-Core®, ICC2, MCC, Pro-C®, Pro-HC, X2, X-Core®, XC Hybrid, NODE, NODE-BT, and WVC. It also works with any 24 VAC controller from Rain Bird, Irritrol, Toro, Orbit, or other vendors that accepts a normally open or normally closed rain switch on its sensor terminal. On controllers without a SENS input, splice the sensor in series on the valve common (a standard install method covered in any rain sensor manual).\u003c\/p\u003e\u003ch3\u003eOptional Accessories — Sold Separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSGM\u003c\/strong\u003e — Rain Sensor Gutter Mount for tool-free clamp-on installation on rain gutters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWS-GUARD\u003c\/strong\u003e — Wireless Sensor Guard, a vandal-resistant enclosure for pedestal or flat-surface mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eStop by Garoppo’s to pick one up, or schedule local delivery within our service area.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54184060354852,"sku":"50761","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/5322\/9860\/files\/hunter-mini-clik-installed-with-wall-mount-controller-diagram_c8aec2ae-2aaa-45d2-b174-e5967816acd8.png?v=1780413006","url":"https:\/\/garoppos.com\/products\/hunter-mini-clik-wired-rain-sensor","provider":"Garoppo's Stone \u0026 Garden Center and Feed \u0026 Pet Supply","version":"1.0","type":"link"}