{"product_id":"hunter-pgv-100-g-s-1-in-slip-socket-inline-irrigation-valve","title":"Hunter PGV-100-G-S 1 in. Slip Socket Inlet\/Outlet Inline Irrigation Valve, Globe Configuration, No Flow Control","description":"\u003cp\u003eThe Hunter® PGV-100-G-S is the slip-socket version of Hunter’s workhorse 1 in. PGV irrigation valve — same screw-top body, same double-beaded diaphragm, same encapsulated solenoid that’s saved Hunter’s reputation in the field for decades. The “G” means globe configuration (vertical flow), the “S” means slip socket inlet and outlet for direct PVC solvent welding. No flow control knob (step up to PGV-101 if you need throttling), no factory-installed accessories.\u003c\/p\u003e\n\u003ch3\u003eWhy Pros Specify the 1 in. PGV\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 in. slip socket inlet \u0026amp; outlet\u003c\/strong\u003e — solvent-weld directly to schedule 40 PVC; no thread tape, no leak path at the joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobe configuration\u003c\/strong\u003e — inlet and outlet on opposite sides for clean inline plumbing layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal \u0026amp; internal manual bleed\u003c\/strong\u003e — flick the solenoid 1\/4 turn counterclockwise to open the valve manually for system flush or zone testing without the controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-beaded diaphragm seal\u003c\/strong\u003e — redundant sealing surface; the failure mode for cheaper valves is a stretched single bead; the PGV’s diaphragm holds up year after year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCaptive bonnet screws\u003c\/strong\u003e — six screws stay attached to the bonnet when you back them out; nothing to drop in the valve box at 7 PM with a flashlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple-tool bonnet screws\u003c\/strong\u003e — flat-blade, Phillips, OR a 1\/4 in. nut driver; whatever’s in your truck tonight will work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncapsulated solenoid with captive plunger\u003c\/strong\u003e — field-serviceable without disassembling the bonnet; plunger doesn’t drop into the body when you unscrew the solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow range: 0.2 to 40 GPM\u003c\/strong\u003e — covers everything from a single drip-line zone to a full lawn rotor zone on one body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure: 20 to 150 PSI\u003c\/strong\u003e — municipal water, well pressure, booster pump, no derating needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150°F max temperature\u003c\/strong\u003e — safe in slab installs near hot lines and in southwest desert valve boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% water-tested at the factory\u003c\/strong\u003e — every valve runs on a pressure stand before it ships; no bad-out-of-box surprises\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2-year manufacturer warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere It Shines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNew residential and light-commercial builds where the mainline is schedule 40 PVC and the contractor wants a direct slip joint (no thread adapter)\u003c\/li\u003e\n\u003cli\u003eService calls replacing a leaking Orbit, Toro, or Rain Bird DV valve — the PGV body and footprint match the standard 1 in. valve box layout; pull-and-replace in 15 minutes\u003c\/li\u003e\n\u003cli\u003eDrip-line zones that need a basic on\/off valve without flow throttling (PGV-101 with flow control is the step-up for fine-tuning)\u003c\/li\u003e\n\u003cli\u003eCrews who stock 1 in. PVC fittings on the truck and don’t want to add 1 in. FPT adapters to the parts list\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel number: PGV-100-G-S (Hunter SKU PGV100GS)\u003c\/li\u003e\n\u003cli\u003eType: 1 in. inline irrigation valve, screw-top, slip socket inlet \/ slip socket outlet, globe configuration, no flow control\u003c\/li\u003e\n\u003cli\u003eFlow range: 0.2 to 40 GPM\u003c\/li\u003e\n\u003cli\u003eRecommended pressure range: 20 to 150 PSI\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: up to 150°F (66°C)\u003c\/li\u003e\n\u003cli\u003eSolenoid: 24 VAC, 350 mA inrush \/ 190 mA holding @ 60 Hz (370 mA inrush \/ 210 mA holding @ 50 Hz)\u003c\/li\u003e\n\u003cli\u003eBody material: glass-filled nylon\u003c\/li\u003e\n\u003cli\u003eDiaphragm: Buna-N with reinforced fabric\u003c\/li\u003e\n\u003cli\u003eBonnet attachment: 6 captive screws, triple-tool head (flat \/ Phillips \/ 1\/4 in. nut driver)\u003c\/li\u003e\n\u003cli\u003eManual bleed: external (1\/4-turn solenoid) and internal (bleed screw)\u003c\/li\u003e\n\u003cli\u003ePressure loss @ 20 GPM globe configuration: 5 PSI\u003c\/li\u003e\n\u003cli\u003ePressure loss @ 40 GPM globe configuration: 14 PSI\u003c\/li\u003e\n\u003cli\u003eWarranty: 2-year manufacturer warranty\u003c\/li\u003e\n\u003cli\u003eUPC: 611698111567\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne PGV-100-G-S 1 in. inline valve, fully assembled with diaphragm and encapsulated 24 VAC solenoid\u003c\/li\u003e\n\u003cli\u003ePrinted install reference card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstall Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlumbing:\u003c\/strong\u003e Both inlet and outlet are 1 in. slip sockets sized for schedule 40 PVC. Dry-fit the line first, mark the flow direction (arrow on the body), apply PVC primer to both fitting and pipe, then cement — full 1\/4 turn at assembly. Honor the flow arrow; reversing the valve causes erratic open\/close behavior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Drop into a standard 6 in. or 10 in. round \/ 12 in. or 14 in. rectangular valve box on washed gravel base. Wire leads from the solenoid go up to the controller via waterproof connectors (DBR\/Y, DBY\/B, or equivalent silicone-filled splice nuts).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e Two 18 AWG leads from the solenoid to the controller — one to the station (1 through 6 \/ 23 \/ 32 depending on controller), one to the C (common) terminal. Polarity does not matter on a standard 24 VAC AC solenoid. For a DC-latching solenoid setup (battery-powered controller), step up to the PGV-100-G-S-DC variant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual bleed for commissioning:\u003c\/strong\u003e rotate the solenoid 1\/4 turn counterclockwise to open the valve, flush the lateral, then rotate clockwise to close. Or use the internal bleed screw (top of bonnet) for a controlled trickle that doesn’t mist the valve box.\u003c\/p\u003e\n\u003ch3\u003eNeed a Different Configuration?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-100-G\u003c\/strong\u003e — 1 in. screw-top valve, female NPT thread inlet \/ outlet, no flow control (same body, threaded instead of slip)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-100-G-DC\u003c\/strong\u003e — threaded female NPT, DC-latching solenoid for battery-powered controllers (Node, NODE-BT, WVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-100-G-S-DC\u003c\/strong\u003e — slip socket inlet\/outlet, DC-latching solenoid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-100-G-LS\u003c\/strong\u003e — threaded female NPT, no solenoid (paired with an external Accu Sync, plant the solenoid yourself, or use the body as a passive throttle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-101-G\u003c\/strong\u003e — 1 in. screw-top valve with flow control knob on the bonnet, female NPT inlet \/ outlet (use when you need to throttle a zone manually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-100-A\u003c\/strong\u003e — 1 in. angle valve (90° configuration), female NPT inlet \/ outlet, no flow control — for vertical-up risers off a horizontal lateral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-100-MM\u003c\/strong\u003e — 1 in. male NPT inlet and outlet, no flow control — for direct thread-into-tee installs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePGV-151-G\u003c\/strong\u003e \/ \u003cstrong\u003ePGV-201-G\u003c\/strong\u003e — 1½ in. and 2 in. PGV bodies for higher-flow zones (20–120 GPM and 20–150 GPM respectively)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Accessories — Sold Separately\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccu Sync®\u003c\/strong\u003e — in-line pressure regulator that screws into the bonnet of the PGV (adjustable 15–100 PSI; protects drip and low-flow zones from upstream pressure spikes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC-latching solenoid (P\/N 458200)\u003c\/strong\u003e — field-retrofit a standard PGV to work with battery-powered Node controllers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolenoid conduit cover (P\/N 464322)\u003c\/strong\u003e — weather-tight enclosure for the solenoid lead exit when the valve is mounted above grade or in an exposed pump house\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHunter Mini-Clik \/ Rain-Clik\u003c\/strong\u003e — rain sensors that wire to the controller and pause the PGV automatically during rain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStop by Garoppo’s to pick one up, or schedule local delivery within our service area.\u003c\/p\u003e","brand":"Hunter","offers":[{"title":"Default Title","offer_id":54212351000868,"sku":"59762","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/5322\/9860\/files\/hunter-pgv-100-g-s-1-inch-irrigation-valves-installed-in-valve-box-on-lawn_0aaacb7c-9190-408d-9da1-b28d7c5c5a05.jpg?v=1780498884","url":"https:\/\/garoppos.com\/products\/hunter-pgv-100-g-s-1-in-slip-socket-inline-irrigation-valve","provider":"Garoppo's Stone \u0026 Garden Center and Feed \u0026 Pet Supply","version":"1.0","type":"link"}