{"product_id":"netafim-techline-ez-t12tee-12mm-insert-tee-for-drip-irrigation","title":"Netafim Techline EZ T12TEE 12mm Insert Tee for Drip Irrigation","description":"\u003cp\u003eBranch a 12mm Netafim Techline EZ dripline into two separate runs without clamps, glue, or a tool box full of fittings. The T12TEE is the OEM Netafim insert tee for Techline EZ tubing — three matched barbed ports, one-piece molded body, push the cut ends of the dripline onto the barbs and you’re branched. Sized for the 0.426″ ID that 12mm Techline EZ runs, so the seal is engineered for that exact tubing instead of a generic 1\/2″ barb that fits four sizes badly.\u003c\/p\u003e\u003ch3\u003eWhy Netafim Is the Right Match\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOEM Netafim — the same brand as your Techline EZ dripline, so the barb-to-ID fit is engineered, not approximated\u003c\/li\u003e\n\u003cli\u003e12mm sized for Netafim Techline EZ dripline (0.426″ ID)\u003c\/li\u003e\n\u003cli\u003eTool-free installation — installs in seconds using only your hands; no clamps, inserting tools, or sealants required\u003c\/li\u003e\n\u003cli\u003e3-way distribution — split a single line of water into two separate branches, ideal for garden beds, row crops, and bed-to-bed jumps\u003c\/li\u003e\n\u003cli\u003eUV resistant plastics — formulated for prolonged outdoor exposure and underground use\u003c\/li\u003e\n\u003cli\u003eOne-piece construction — no joints, no glued seams, nothing to come apart underground in year five\u003c\/li\u003e\n\u003cli\u003eAllows for easy on-site inspection — you can see whether the dripline is fully home on each barb without disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere It Shines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBranching a 12mm Techline EZ run off a main loop to feed a side bed or row\u003c\/li\u003e\n\u003cli\u003eBuilding a manifold of multiple drip zones from a single supply line\u003c\/li\u003e\n\u003cli\u003eSplicing in a repair branch around a damaged section of dripline\u003c\/li\u003e\n\u003cli\u003eRow-crop and raised-bed gardens where each bed gets its own lateral tap-off\u003c\/li\u003e\n\u003cli\u003eService-call patches on a customer’s drip system — cut, push, walk away\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: T12TEE\u003c\/li\u003e\n\u003cli\u003eSizing: 12mm — fits 0.426″ inside diameter dripline\u003c\/li\u003e\n\u003cli\u003eCompatible with: Netafim Techline EZ 12mm dripline\u003c\/li\u003e\n\u003cli\u003eGeometry: Three-way tee (run-run-branch)\u003c\/li\u003e\n\u003cli\u003eConnection: Barbed insert — tool-free push-fit, no clamps required\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 50 psi\u003c\/li\u003e\n\u003cli\u003eConstruction: One-piece molded plastic, UV-resistant\u003c\/li\u003e\n\u003cli\u003eUse: Buried or surface, residential \/ commercial drip irrigation\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 1 lb per pack\u003c\/li\u003e\n\u003cli\u003eOrigin: Netafim USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstall Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut the dripline square with a sharp knife or PE pipe cutter (a ragged cut won’t seal)\u003c\/li\u003e\n\u003cli\u003ePush each tubing end onto a barb fully — the last barb ridge should be inside the tubing\u003c\/li\u003e\n\u003cli\u003eNo clamp required — the barb design seals against the dripline ID once the tubing is fully home\u003c\/li\u003e\n\u003cli\u003eKeep system pressure under 50 psi — the Techline EZ family is a low-pressure dripline, not a poly mainline\u003c\/li\u003e\n\u003cli\u003ePressure-test before backfilling, especially on long branched runs\u003c\/li\u003e\n\u003cli\u003eShut the zone off at the valve before cutting into a pressurized line\u003c\/li\u003e\n\u003cli\u003eFor 17mm Techline dripline — this is the wrong size; use Netafim Model TLTEE instead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePair With\u003c\/h3\u003e\u003cp\u003eFor inline splices in 12mm Techline EZ, use the Netafim \u003cstrong\u003eT12COUP\u003c\/strong\u003e insert coupling. For 4-way branching, the \u003cstrong\u003eT12CROSS\u003c\/strong\u003e. For threaded transitions to 1\/2″ or 3\/4″ MPT supply, the \u003cstrong\u003eT12050MA\u003c\/strong\u003e or \u003cstrong\u003eT12075MA\u003c\/strong\u003e adapters.\u003c\/p\u003e\u003cp\u003eStop by Garoppo’s for the count you need, or order ahead for the next install.\u003c\/p\u003e","brand":"Drip Works","offers":[{"title":"Default Title","offer_id":54139781546276,"sku":"50908","price":0.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/5322\/9860\/files\/netafim-techline-ez-12mm-insert-tee-front_aed1796b-ef50-4501-8c68-36415c7c38a6.png?v=1780337172","url":"https:\/\/garoppos.com\/products\/netafim-techline-ez-t12tee-12mm-insert-tee-for-drip-irrigation","provider":"Garoppo's Stone \u0026 Garden Center and Feed \u0026 Pet Supply","version":"1.0","type":"link"}