{"product_id":"netafim-techline-tlcoup-17mm-insert-coupling-for-drip-irrigation","title":"Netafim Techline TLCOUP 17mm Insert Coupling for Drip Irrigation","description":"\u003cp\u003eSplice Netafim Techline dripline in the field without clamps, glue, or a tool box full of fittings. The TLCOUP is the OEM Netafim insert coupling for 17mm Techline tubing — barbed inlet on each end, one-piece molded body, push the cut ends of the dripline onto the barbs and the job is done. Designed specifically for the 0.56″–0.60″ ID range that Netafim’s 17mm Techline dripline runs in, so the seal is dialed in for that exact tubing instead of a generic 1\/2″ barb that fits four sizes badly.\u003c\/p\u003e\u003ch3\u003eWhy Netafim Is the Right Match\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOEM Netafim — the same brand as your Techline dripline, so the barb-to-ID fit is engineered, not approximated\u003c\/li\u003e\n\u003cli\u003e17mm sized for Netafim Techline HCVXR, HCVXR-RW\/RWP, CV, DL, and RW\/RWP driplines, plus generic 17mm PE irrigation hose in the 0.56–0.60″ ID range\u003c\/li\u003e\n\u003cli\u003eBarbed fitting — secure fit and easy installation, no clamps, no glue, no tools\u003c\/li\u003e\n\u003cli\u003eUV resistant — survives direct sun and the chemistry of irrigation water (chlorinated supply, fertigation, etc.)\u003c\/li\u003e\n\u003cli\u003eOne-piece construction — no joints, no glued seams, nothing to come apart underground in year five\u003c\/li\u003e\n\u003cli\u003eAllows for easy on-site inspection — you can see whether the dripline is fully home on the barb without disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere It Shines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSplicing a buried Techline run that got cut by a shovel, gopher, or aerator tine\u003c\/li\u003e\n\u003cli\u003eJoining two partial reels of 17mm Techline into one continuous loop or grid\u003c\/li\u003e\n\u003cli\u003eExtending an existing dripline zone — one coupling per tube end\u003c\/li\u003e\n\u003cli\u003eService-call patches on a customer’s drip system — cut, push, walk away\u003c\/li\u003e\n\u003cli\u003eTest-bed and demo installs where you’ll re-route the dripline later (no glue to fight)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: TLCOUP\u003c\/li\u003e\n\u003cli\u003eSizing: 17mm — fits 0.56″ to 0.60″ inside diameter dripline\u003c\/li\u003e\n\u003cli\u003eCompatible with: Netafim Techline HCVXR, HCVXR-RW\/RWP, CV, DL, RW\/RWP, and 17mm PE irrigation hose in the 0.56–0.60″ ID range\u003c\/li\u003e\n\u003cli\u003eGeometry: Inline (straight-through) two-port coupling\u003c\/li\u003e\n\u003cli\u003eConnection: Barbed insert — tool-free push-fit, no clamps required\u003c\/li\u003e\n\u003cli\u003eConstruction: One-piece molded plastic, UV-resistant\u003c\/li\u003e\n\u003cli\u003eUse: Buried or surface, residential \/ commercial drip irrigation\u003c\/li\u003e\n\u003cli\u003eApproximate weight: 1 lb per pack\u003c\/li\u003e\n\u003cli\u003eOrigin: Netafim USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstall Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut the dripline square with a sharp knife or PE pipe cutter (a ragged cut won’t seal)\u003c\/li\u003e\n\u003cli\u003ePush each tubing end onto the barb fully — the last barb ridge should be inside the tubing\u003c\/li\u003e\n\u003cli\u003eNo clamp required — the barb design seals against the dripline ID once the tubing is fully home\u003c\/li\u003e\n\u003cli\u003ePressure-test before backfilling, especially on long runs where one weak coupling drops the whole zone\u003c\/li\u003e\n\u003cli\u003eShut the zone off at the valve before cutting into a pressurized line\u003c\/li\u003e\n\u003cli\u003eFor 12mm Techline EZ — this is the wrong size; use Netafim Model T12COUP instead\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePair With\u003c\/h3\u003e\u003cp\u003eFor tee\/branch connections in 17mm Techline, look at the Netafim TLTEE (insert tee), TLELL (insert elbow), and TLCROS (insert cross). For threaded transitions to 1\/2″ or 3\/4″ MPT supply lines, the TL050MA and TL075MA adapters.\u003c\/p\u003e\u003cp\u003eStop by Garoppo’s for the count you need, or order ahead for the next install.\u003c\/p\u003e","brand":"Drip Works","offers":[{"title":"Default Title","offer_id":54139485389092,"sku":"50910","price":0.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/5322\/9860\/files\/netafim-techline-17mm-insert-coupling-diagonal_47ed4682-515f-49a7-ad3a-201e9b8f75b2.png?v=1780335955","url":"https:\/\/garoppos.com\/products\/netafim-techline-tlcoup-17mm-insert-coupling-for-drip-irrigation","provider":"Garoppo's Stone \u0026 Garden Center and Feed \u0026 Pet Supply","version":"1.0","type":"link"}