{"product_id":"spears-474-010-1-in-pvc-insert-adapter","title":"Spears® 474-010 1 in. PVC Insert Adapter, Insert × Socket, SCH 40, Domestic","description":"\u003cp\u003eThe Spears® 474-010 is the 1 in. transition fitting irrigation crews keep in the truck for the joint nobody warned them about — barbed insert end pushes into 1 in. flexible poly pipe, socket end solvent-welds onto 1 in. schedule 40 PVC. Molded white PVC, Spears USA marking, domestic-manufactured to SCH 40 \/ standard dimensions.\u003c\/p\u003e\n\u003ch3\u003eWhy You’d Reach for the 474-010\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert (barb) inlet x Socket outlet\u003c\/strong\u003e — transitions between flexible 1 in. poly mainline and rigid 1 in. schedule 40 PVC lateral with no thread tape, no compression nut, no leak path at the joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed insert with 3 retention ribs\u003c\/strong\u003e — molded ridge profile grips the poly inner wall; cinch with a stainless screw clamp or pinch clamp for a long-term joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocket end takes solvent cement\u003c\/strong\u003e — prime, cement, push-and-quarter-turn for a chemically-welded joint that’s as strong as the pipe itself\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolded PVC (Type I), white\u003c\/strong\u003e — chemically resistant to dirt, fertilizers, soil acids, and the typical irrigation water chemistry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF-certified domestic manufacture\u003c\/strong\u003e — carries the “NSF-pw” mark for potable-water service, made in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule 40 \/ standard dimensions\u003c\/strong\u003e — matches any 1 in. PVC pipe and fitting in the schedule 40 system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-5\/8 in. overall length\u003c\/strong\u003e — standard footprint, works in any valve box or trench manifold layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere It Fits in the System\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip irrigation transitions:\u003c\/strong\u003e when your 1 in. mainline switches from rigid PVC to flexible poly for the drip distribution, this is the connector. Push the barb into the poly, clamp it, solvent-weld the socket onto the PVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprinkler zone tail-outs:\u003c\/strong\u003e if a zone runs PVC for the lateral and poly for the final drop to the head, the 474-010 makes the transition without a fitting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePond, water-feature, and koi-pond plumbing:\u003c\/strong\u003e connecting a flexible 1 in. poly return line into rigid PVC at the skimmer or pump bulkhead\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePool plumbing repairs:\u003c\/strong\u003e when a section of poly hose needs to splice into a PVC system without a re-plumb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop \/ hobby plumbing:\u003c\/strong\u003e anywhere 1 in. poly and 1 in. PVC need to meet and stay together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Spears Manufacturing Company\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 474-010\u003c\/li\u003e\n\u003cli\u003eFirst Supply item number: P40ISAG\u003c\/li\u003e\n\u003cli\u003eType: standard insert adapter (insert × socket)\u003c\/li\u003e\n\u003cli\u003eNominal size: 1 in.\u003c\/li\u003e\n\u003cli\u003eEnd 1 (inlet): 1 in. barbed insert (for 1 in. ID flexible poly)\u003c\/li\u003e\n\u003cli\u003eEnd 2 (outlet): 1 in. solvent-weld socket (for 1 in. schedule 40 PVC)\u003c\/li\u003e\n\u003cli\u003eSchedule \/ dimension: SCH 40 \/ standard\u003c\/li\u003e\n\u003cli\u003eMaterial: PVC, Type I, molded white\u003c\/li\u003e\n\u003cli\u003eOverall length: 2-5\/8 in.\u003c\/li\u003e\n\u003cli\u003ePressure rating: matches 1 in. SCH 40 PVC pipe (~450 PSI burst, derated for sustained working pressure per ASTM D2241)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 33°F to 140°F (PVC max service temperature)\u003c\/li\u003e\n\u003cli\u003eOrigin: domestic, U.S.A.\u003c\/li\u003e\n\u003cli\u003eCertifications: NSF-pw (potable water service)\u003c\/li\u003e\n\u003cli\u003eUPC: 10054211191771 (case GTIN-14)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBarb end into poly pipe:\u003c\/strong\u003e Cut the poly square. Warm the poly tubing in hot water for 30 seconds if it’s a cold-day install (makes the insert push-fit easier). Push the barb fully into the pipe so the poly is seated past the third retention rib. Secure with a stainless steel hose clamp or pinch clamp positioned over the barbed section — tighten until the clamp screw is snug but not over-deformed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSocket end into PVC pipe:\u003c\/strong\u003e Dry-fit first to verify the lay-up. Apply Spears P-70 (or equivalent) primer to BOTH the pipe end and the inside of the socket. Apply PVC solvent cement (medium-bodied for 1 in.) to both surfaces. Push the pipe fully into the socket and rotate 1\/4 turn to spread the cement. Hold for 30 seconds. Cure for 1 hour before low-pressure water test; 24 hours before full pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlow direction:\u003c\/strong\u003e non-directional — this is a passive transition fitting, install it whichever way the run requires.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Spears 474-010 1 in. insert adapter (insert x socket), bulk-packed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Accessories — Sold Separately\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 in. stainless hose clamps or pinch clamps for the barb-end joint\u003c\/li\u003e\n\u003cli\u003eSpears P-70 PVC primer (purple) for the socket joint\u003c\/li\u003e\n\u003cli\u003eSpears PVC solvent cement (medium body, for pipe up to 6 in.)\u003c\/li\u003e\n\u003cli\u003e1 in. SCH 40 PVC pipe and additional fittings (tees, elbows, couplings)\u003c\/li\u003e\n\u003cli\u003e1 in. flexible poly irrigation tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStop by Garoppo’s to pick one up, or schedule local delivery within our service area.\u003c\/p\u003e","brand":"Spears","offers":[{"title":"1\"","offer_id":54226582012196,"sku":"50785","price":0.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/5322\/9860\/files\/spears-474-010-1-inch-pvc-insert-adapter-side-view_463bb516-1e02-42e9-9e0c-3b1405c748c3.png?v=1780509625","url":"https:\/\/garoppos.com\/products\/spears-474-010-1-in-pvc-insert-adapter","provider":"Garoppo's Stone \u0026 Garden Center and Feed \u0026 Pet Supply","version":"1.0","type":"link"}