Define garden beds, patios, and walkways with a clean, finished concrete edge. The Belgard Edgestone Edger is a two-faced wet-cast concrete landscape edging unit with a rustic cobbled-stone look — sold by the square foot, so you buy exactly the run you need for straight bed lines or sweeping curves. Each 8" × 6" × 2½" piece is molded by Belgard (Oldcastle APG) from concrete with natural aggregates and through-body integrated color, and carries a lifetime transferable limited warranty.
Color Choices
-
Midnight — deep charcoal for a crisp, modern edge
-
Pewter Blend — soft warm grey that pairs with almost anything
-
Harvest Blend — warm earthy brown
-
Autumn Blend — golden tan-brown
-
Dakota Blend — mixed brown-grey with natural variation
Why Choose the Edgestone Edger
-
Two finished faces — a clean edge on borders, bed lines, and mow strips
-
Curves or straight runs — follow any garden-bed shape without specialty cuts
-
Integrated through-body color — runs through the unit, so it won’t fade or wear off
-
Low 2½" profile — sets fast and holds landscape edging in place season after season
-
Coordinates with Belgard pavers, walls, and coping for a unified hardscape border
Specifications
-
Material: wet-cast concrete with natural aggregates
-
Nominal size: 8" × 6" × 2½"
-
Sold by: the square foot
-
Finished faces: two
-
Color: integrated, through-body
-
Layout: straight and curved
-
Manufacturer: Belgard (Oldcastle APG)
-
Warranty: lifetime transferable limited
How Much Do You Need?
Each piece presents an 8"-wide × 6"-tall face, so about three pieces make one square foot and cover roughly 2 linear feet of 6-inch-tall border. Measure your bed or path perimeter in feet, divide by two for your approximate square footage, and add about 5% for curves and cuts. (Estimate based on nominal face dimensions — we’ll confirm coverage at pickup.)
Where to Use Concrete Landscape Edging
- Border planting beds and separate mulch from lawn with a crisp mow strip
- Edge a paver walkway, patio, or driveway apron as a hardscape border
- Frame a tree ring or island bed
- Cap a low garden border or hold a raised bed line
Unlike thin plastic or steel edging that buckles and frost-heaves, or poured concrete curbing that needs forms and a cure, Edgestone sets by hand and delivers a solid, color-true concrete curb you can install in an afternoon.
How to Install Edgestone Concrete Edging
- Excavate a shallow, level trench along your layout line and compact the base.
- Set each unit tight to the next; fan the pieces slightly for curves, or butt them square for corners.
- Use a thin bed of leveling sand to fine-tune height and keep the top even.
- Backfill both sides and tamp to lock the border in place.
Sold by the square foot at Garoppo’s — stop in for current pricing and pickup, or ask about local delivery within our service area.
Lock in clean bed lines and stay on schedule with the Belgard Edgestone Edger, a wet-cast concrete landscape edging unit built for production crews. Each 8 x 6 x 2 1/2-inch piece has two finished faces, sets straight or curved borders in a single pass, and is sold by the square foot for precise take-offs. Belgard (Oldcastle APG) molds it from concrete with natural aggregates and through-body color, backed by a lifetime transferable limited warranty.
Color Options
- Midnight: deep charcoal for modern, high-contrast borders.
- Pewter Blend: neutral warm grey that coordinates with most paver fields.
- Harvest Blend: warm earth-tone brown.
- Autumn Blend: golden tan-brown.
- Dakota Blend: mixed brown-grey with natural variation. All five are integral, through-body blends that match existing Belgard installs.
Why Spec the Edgestone Edger
- Two finished faces: a clean edge on both sides of borders, paver edging, and mow strips.
- Curves or straight runs: fan the units for radii or butt them square for corners, with no specialty cuts.
- Through-body color: saw cuts and field trims stay color-true on site instead of flashing grey.
- Low 2 1/2-inch profile: seats fast on a compacted base and holds the line through freeze-thaw cycles.
- Single-source system: coordinates with Belgard pavers, walls, and coping for a unified hardscape border.
Specifications
- Material: wet-cast concrete with natural aggregates.
- Nominal size: 8 x 6 x 2 1/2 in.
- Sold by: the square foot.
- Finished faces: two.
- Color: integrated, through-body.
- Layout: straight and curved.
- Manufacturer: Belgard (Oldcastle APG).
- Warranty: lifetime transferable limited.
Coverage and Take-Offs
Each piece presents an 8-inch-wide by 6-inch-tall face, so roughly three pieces make one square foot and cover about two linear feet of 6-inch border. Measure the bed or path perimeter, divide by two for square footage, and add about 5% for curves and cuts to keep overage and returns to a minimum.
Where to Spec It
- Bed and lawn separation: crisp mow strips that keep mulch and turf apart.
- Paver and patio perimeters: a finished hardscape border around walkways, patios, and driveway aprons.
- Tree rings and island beds: tight radii without custom pieces.
- Low borders: cap or retain raised bed lines.
Unlike plastic or steel edging that buckles and frost-heaves, or poured concrete curbing that needs forms and a cure, Edgestone installs by hand and delivers a solid, color-true concrete curb in a single visit.
Installation
- Excavate and compact a shallow, level trench along the layout line.
- Set each unit tight to the next; fan for curves, butt square for corners.
- Use a thin leveling-sand bed to fine-tune height and keep the top even.
- Backfill both sides and tamp to lock the border in place.
Sold by the square foot at Garoppo's for accurate orders and minimal waste, with local pickup and delivery within our service area. The lifetime transferable warranty is a spec point that reassures homeowners and helps close the sale on curved beds and long borders alike.
