Finish your retaining wall with a split face concrete wall cap that delivers a clean, professional edge. Choose this Cambridge Plus single-sided 13 in x 18 in cap to top straight runs and corners while helping shed water away from the wall. Speed up your DIY build with pieces sized for quick, consistent alignment.
Key Features
-
Single-sided profile: Present a finished face and a clean back-to-wall fit.
-
13 in depth: Create safe overhang and help channel runoff.
-
18 in length: Cover more wall with fewer joints.
-
Split-face texture: Match stone-look walls and reduce visible seams.
-
Concrete construction: Resist weather, impacts, and freeze-thaw cycles.
Applications
Cap retaining walls, raised beds, and seat walls in the backyard. Finish garden steps and short pillars where only one face shows. Use along patios and walkways for a neat, consistent top course.
Specifications
-
Material: Concrete
-
Dimensions: 3 in H x 13 in D x 18 in L
-
Finish: Split-face front; single-sided
-
Colors: Varies by availability; designed to coordinate with matching wall stones
Installation Tips
-
Dry-fit first: Test layout and stagger joints before bonding.
-
Set a slight pitch: Tilt forward to move water off the wall.
-
Adhere securely: Use exterior-grade concrete adhesive or mortar.
-
Create overhang: Leave about 1 in to protect the wall face.
Care & Maintenance
-
Clean easily: Sweep and rinse as needed to remove dirt and salts.
-
Optional sealer: Apply a penetrating concrete sealer for added stain resistance.
Finish walls faster with the Cambridge Plus single-sided split-face wall cap. Deliver a clean, finished top course on seat walls, planters, and retaining runs while keeping layout efficient. Use the 3 in x 13 in x 18 in profile to cover more per piece and keep joints to a minimum.
Key Features
- Single-sided split face: Present a textured show side while keeping a straight back for tight alignment.
- 18 in length: Span more lineal footage per unit to speed installs and reduce seams.
- 13 in depth: Create a stable cap with room for overhang on typical wall widths.
- 3 in height: Achieve a low-profile finish that transitions cleanly at steps and ends.
- Concrete construction: Stand up to outdoor use and routine foot traffic with low maintenance.
- Split-face texture: Blend with natural stone looks and help hide minor scuffs and dirt.
Applications
Cap freestanding and retaining walls, garden planters, and columns where one exposed face is needed. Use on straight runs or cut to fit corners and terminations for a uniform, professional finish.
Specifications
- Material: Concrete
- Dimensions: 3 in H x 13 in D x 18 in L
- Finish: Split-face front; flat top
- Orientation: Single-sided cap
Installation Notes
- Dry-fit first: Snap lines and check overhang for consistency.
- Orient correctly: Face the split side to the show edge.
- Adhere securely: Apply exterior-grade concrete adhesive to clean, dry units.
- Cut as needed: Saw ends to close runs and corners per plan.
Maintain by sweeping debris and rinsing as needed. Avoid acid cleaners to protect the surface appearance.
