Carry more pavers per trip and give your back a break with the Pave Tool Quick-E-Lifters Set of 2, a pair of zinc-plated steel carrying clamps with one lifter for each hand. Each lifter grabs a stack of 3 to 8 pavers along its beveled edge and holds them with rubber grommets, so an installer moves 6 to 16 pavers at a time from the pallet to the field without pinched fingers. A quick pin adjusts the shaft from 8.5" to 13.5" to match the stack you are carrying, and the balanced load on both sides lets you lift symmetrically instead of twisting.
Key Features
-
3 to 8 pavers per lifter: Sized for the common formats you set every day, including 6x6, 6x9 and 12x12, with room for more on thinner units.
-
40% more per trip: Pave Tool rates the lifters at 40% more pavers hauled than by hand, which cuts trips and speeds production by a similar margin.
-
Quick pin adjustment: Pull the pin and slide the shaft anywhere from 8.5" to 13.5" so the clamp closes tight on the stack.
-
Beveled edge and grommets: A beveled lip slips under the stack on the pallet, and replaceable rubber grommets keep the grip firm without marring faces.
-
About Pave Tool: Pave Tool Innovators builds the Quick-E line of ergonomic paver lifters, clamps and installation tools for hardscape crews.
How to Use It
Set the shaft length first. Pull the quick pin, slide the lifter open a touch wider than your stack, and pin it. Slide the beveled edge under a row of pavers on the pallet, squeeze the handle and lift. Use one lifter in each hand and keep the loads even so your spine stays upright rather than torqued to one side. Carry to the install area, set the stack at the laying edge and release. Check the rubber grommets from time to time and swap them when they wear so the grip stays solid. Sold as a set of two, one per hand.
Specifications
- Quantity: set of 2 lifters (one per hand)
- Capacity: 3 to 8 pavers per lifter (6x6, 6x9, 12x12 and more)
- Adjustment: quick pin shaft, 8.5" to 13.5"
- Material: zinc-plated steel with replaceable rubber grommets
- Model: NT0041
- Weight: 16 lb per set
Stop by Garoppo’s Stone & Garden Center and Feed & Pet Supply to see it in person and pick one up, or schedule local delivery within our service area.
Pave Tool Quick-E-Lifters, model NT0041, set of 2. Zinc-plated steel paver carrying clamps, one per hand, each holding 3 to 8 pavers (6x6, 6x9, 12x12 and similar). Quick-pin shaft adjusts 8.5" to 13.5". Beveled pick edge, replaceable rubber grommets. Manufacturer rates throughput at roughly 40% more pavers per trip than hand carrying with a comparable gain in production speed, and positions the tool as back-injury prevention: symmetrical loading in both hands instead of a stack held out front.
Key Features
- Capacity: 3 to 8 pavers per lifter, 6 to 16 per installer per trip depending on format and thickness.
- Adjustment: Quick pin, 8.5" to 13.5" shaft. Set once per pallet.
- Grip: Beveled edge picks off the pallet; rubber grommets hold without marring faces. Grommets are a wear item and replaceable.
- Ergonomics: No pinched fingers; balanced two-hand carry keeps the load close to the body. Manufacturer cites the lower-back injury rate in the trades as the design driver.
- Construction: Zinc-plated steel. 16 lb per set.
Use
Pin the shaft slightly wider than the stack, slide the bevel under a row on the pallet, squeeze and lift. One lifter per hand, loads matched. Stage stacks at the laying edge so the setter never walks back to the pallet. Replace grommets when the grip loosens. Pairs with the Quick-E-BL 180 for wall block and with the rest of the Quick-E system.
Spec Notes
The production case is simple: fewer trips from pallet to laying edge per square foot set, and a load that stays centered on the body instead of held out front. Pave Tool's own comparison is that a stack carried in front of the body multiplies the load on the lower spine, and that back injury is the leading disabler in the trades; the lifters exist to move that load to two balanced side carries. On a crew, one pair per carrier is the right count, and the same pair covers 6x6, 6x9 and 12x12 because the quick pin resets the shaft between pallets in seconds. Replacement grommets are the only consumable; keep a set in the truck. Zinc plating holds up to wet bedding sand and pallet grit without flaking. Model NT0041, store shipping weight 16 lb for the pair, sold per set of 2.
Specifications
- Set: 2 lifters.
- Capacity: 3 to 8 pavers each.
- Shaft: 8.5" to 13.5", quick pin.
- Material: Zinc-plated steel; replaceable rubber grommets.
- Model: NT0041. 16 lb per set. Sold per set of 2.
