Rain Bird 1806 PRS-45 6-inch pop-up spray head with built-in 45 psi pressure regulator
Rain Bird 1800 Series PRS-45 spray heads — assembled view showing the 1800-series body family
Rain Bird 1800 PRS-45 spray body feature graphic showing pressure-regulated stem construction
Rain Bird 1806 PRS-45 nozzle compatibility graphic — works with all Rain Bird plastic spray nozzles
Roll over image to zoom in Click on image to zoom
Rain Bird 1806 PRS-45 6-inch pop-up spray head with built-in 45 psi pressure regulatorRain Bird 1800 Series PRS-45 spray heads — assembled view showing the 1800-series body familyRain Bird 1800 PRS-45 spray body feature graphic showing pressure-regulated stem constructionRain Bird 1806 PRS-45 nozzle compatibility graphic — works with all Rain Bird plastic spray nozzles

Rain Bird 1806 PRS-45 Pop-Up Spray Head, 6 Inch

Rain Bird
Price:
$15.99

Description

Pop the spray nozzle 6 inches above the lawn with the Rain Bird 1806 PRS-45 Spray Head. The taller pop-up clears longer turf, ornamental grasses, and groundcover that swallow a standard 4 in head. Built-in PRS regulator inside the stem holds every emitter on the zone at a clean 45 psi outlet pressure — no misting at the end of the line, no weak coverage at the far edge, and up to 70% flow restriction if a nozzle is damaged or missing. Designed for use with all Rain Bird plastic spray nozzles, including R-VAN rotary nozzles at their optimal 45 psi performance point.

Why Irrigation Pros Pick This Body

  • 6 in pop-up height (15.2 cm) — clears taller turf, groundcover, and ornamental beds that hide 4 in heads
  • Patented PRS pressure regulator built into the stem — constant 45 psi outlet regardless of inlet pressure
  • 45 psi is the optimal operating pressure for Rain Bird R-VAN rotary nozzles
  • Restricts flow up to 70% if a nozzle is removed or damaged — cuts water loss and protects the rest of the zone
  • Eliminates misting and fogging caused by high inlet pressure
  • Compatible with all Rain Bird plastic spray nozzles
  • EPA WaterSense certified — meets state PRS requirements
  • “PRS-45” stamped on cap for easy ID during maintenance
  • Five-year trade warranty

Where It Shines

  • Lawns with longer cut height or thicker turf
  • Ornamental beds and groundcover plantings
  • Areas with high or fluctuating municipal water pressure
  • Mixed-nozzle zones — constant outlet pressure regardless of nozzle
  • State jurisdictions requiring pressure-regulated spray heads (CA, WA, CO, etc.)

Specifications

  • Model: 1806P45
  • Pop-up height: 6 in (15.2 cm)
  • Inlet pressure range: 15-70 psi (operates within range; regulates outlet to 45 psi)
  • Outlet pressure: 45 psi (regulated)
  • Flow rate range: 0.62 to 20.1 gpm (depends on nozzle)
  • Features: Pressure regulation, Seal-A-Matic (SAM) check valve, flow shutoff if nozzle removed
  • Compatible with: All Rain Bird plastic spray nozzles, including R-VAN rotary
  • Nozzle included: No (purchase separately)
  • Non-potable use: Yes
  • Certifications: EPA WaterSense
  • Warranty: 5-year trade
  • Approximate weight: 1 lb

Sizing Up vs Down

This is the 6 in pop-up version. The same body is also available in 4 in (model 1804P45) for standard lawn-edge zones, and 12 in (model 1812P45) for tall plantings and shrub beds. The PRS-45 pressure regulation is identical across all three.

Note: This is the body only — choose your Rain Bird nozzle (R-VAN, MPR, or U-series) separately based on the spray arc and radius needed for the zone.

Stop by Garoppo’s to pick one up, or schedule local delivery within our service area.

You may also like

Recently viewed