Rain Bird ROTORTOOL Rotor Screwdriver and Pull-Up Tool


Unit of Sale: Per Unit
Price:
$3.00

Description

Tune a rotor sprinkler without kneeling in the spray for ten minutes with the Rain Bird ROTORTOOL Rotor Screwdriver and Pull-Up Tool. A plastic handle carries a metal winged blade: one end is the flat screwdriver that turns the radius and arc screws, the other hooks under the rotor cap to pull the riser up and hold it while you change a nozzle. It fits Rain Bird 3500, 5000, 5000 Plus, 5500, Falcon 6504, 7005, 8005, EAGLE 351B, 32SA, 42SA and 52SA rotors along with other major rotor brands, so one tool in the pocket covers the whole yard.

Key Features

  • Two tools in one: Flat-blade screwdriver for arc and distance screws plus a pull-up hook for lifting the rotor riser.
  • Nozzle changes made simple: Pull the head up, hold it and swap in a new nozzle without digging the rotor out of the ground.
  • Adjust in place: Set the arc and throw distance while the head is installed and running.
  • Broad fit: Works with the Rain Bird 3500, 5000, 5500, Falcon, EAGLE 351B and SA-series rotors and other major rotor brands.
  • About Rain Bird: This is the maker’s own service tool for its residential and commercial rotor lines, designed around the adjustment screws on those heads.

How to Use It

Slide the hooked end under the rim of the rotor cap and lift the riser until it stays up, then hold it there to unscrew and replace the nozzle. With the zone running, use the flat blade on the top screw to shorten or lengthen the throw and on the arc screw to open or close the watering pattern until the spray lands where the lawn needs it and not on the driveway. Keep the tool in the shed with your spare nozzles and pull it out each spring when heads shift over the winter. Wipe the blade dry after use so it stays clean for the next adjustment.

Specifications

  • Model: ROTORTOOL
  • Handle: plastic; blade: metal, winged flat blade
  • Functions: flat-blade screwdriver and rotor pull-up hook
  • Fits: Rain Bird 3500, 5000, 5000 Plus, 5500, Falcon 6504, 7005, 8005, EAGLE 351B, 32SA, 42SA, 52SA and other major rotor brands
  • Sold per tool

Stop by Garoppo’s Stone & Garden Center and Feed & Pet Supply to see it in person and pick one up, or schedule local delivery within our service area.

It fits the 3500, 5000, 5000 Plus, 5500, Falcon 6504, 7005, 8005, EAGLE 351B, 32SA, 42SA and 52SA series, plus most other major rotor brands.
Yes. The pull-up end lifts the riser so you can hold it up and swap the nozzle with the head still installed.
Yes. The flat blade turns both the radius screw for distance and the arc adjustment for the watering pattern.
The handle is plastic and the winged blade is metal, so the working end holds up to repeated screw adjustments.

You may also like

Recently viewed