Refresh a faded tractor hood, trailer frame or mower deck with Rust-Oleum Specialty Farm & Implement Spray Paint JD Green 12 oz, a heavy-duty rust-preventive enamel matched to the green used on John Deere equipment. The 12 oz aerosol wears a color-matched cap and lays down a durable gloss finish on primed metal or wood. Because the oil-modified alkyd resin was built for machinery that lives outdoors, the coating shrugs off rain, cold snaps and summer heat, holds its color season after season, and keeps rust from creeping back onto the implements you depend on.
Key Features
-
Original equipment color match: JD Green is matched to genuine John Deere green, so a touched-up fender blends in with the rest of the machine.
-
Heavy-duty rust protection: The oil-modified alkyd enamel seals metal against moisture and stops rust on tractors, trailers, lawn mowers and other machinery.
-
Weather-resistant gloss finish: The coating resists chipping and color fade through wet, cold and hot weather, and it bonds to both metal and wood.
-
Same-day turnaround: Dries to the touch in 2 to 4 hours and can be handled in 5 to 9 hours, so a repaired part goes back on the same afternoon.
-
About Rust-Oleum: Rust-Oleum makes rust-preventive paints and coatings for home, farm and industrial use, and its Farm & Implement line covers the common equipment colors.
How to Use It
Start with a clean, dry surface. Scrape off loose rust and flaking paint, sand the edges smooth and wipe away dust and oil. Prime bare metal with a Rust-Oleum metal primer first for the strongest bond, then shake the can well and apply light, even coats until the color is uniform. Recoat within 1 hour, or wait a full 48 hours before adding another coat. Work between 50 and 90 degrees F, and plan on 6 to 7 sq ft of coverage per can, which means a hood or a pair of fenders usually calls for two cans. Do not use this farm and implement paint on galvanized metal.
Specifications
- Size: 12 oz aerosol can
- Color: JD Green (John Deere original equipment color match)
- Finish: Gloss
- Resin: Oil-modified alkyd enamel
- Coverage: 6 to 7 sq ft per can
- Dry time: Touch 2 to 4 hours, handle 5 to 9 hours, recoat within 1 hour or after 48 hours
- Model: 280124
Stop by Garoppo’s Stone & Garden Center and Feed & Pet Supply to see it in person and pick one up, or schedule local delivery within our service area.
Rust-Oleum Specialty Farm & Implement 280124 (JD Green) is a 12 oz aerosol oil-modified alkyd enamel matched to John Deere original equipment green. Spec it for touch-up and full repaint of tractors, trailers, mower decks and shop-built implements where a gloss, rust-preventive topcoat is required on ferrous metal or wood. Coverage runs 6 to 7 sq ft per can, so take off surface area and round up; a hood plus two fenders is a two-can job with primer. Not approved for galvanized substrates.
Key Features
- OEM color match: JD Green is matched to Deere equipment green; the same Specialty line carries JD Yellow and other original equipment colors, so a mixed fleet can be touched up from one product family with the same cure schedule.
- Rust-preventive alkyd: Oil-modified alkyd resin cures to a chip-resistant gloss film that resists wet, cold and hot exposure and holds color outdoors.
- Cure schedule: Tack-free in 2 to 4 hours, handle in 5 to 9 hours. Recoat window is within 1 hour or after 48 hours; recoating between those points risks lifting.
- Application window: Apply at 50 to 90 degrees F on a clean, dry, primed surface.
- Documentation: Technical data sheet SPC-65 and the 280124 safety data sheet are attached to this product for submittals.
How to Use It
Remove loose rust and failed coatings by scraping or wire brushing, feather the edges and solvent-wipe to remove oil and grease. Prime bare steel with a Rust-Oleum metal primer, then apply the enamel in light, even passes to a uniform gloss. Hold ambient and substrate temperature between 50 and 90 degrees F and keep humidity low to avoid blush. Second coat goes on within 1 hour of the first or after 48 hours. Allow the full handle time before reinstalling parts and longer before returning equipment to service or exposing the film to fuel and hydraulic spills. Do not apply to galvanized metal; use a galvanized-compatible primer system instead. For fleet touch-up, keep one can per equipment color on the service truck so chips and weld repairs get sealed the same day they happen rather than after rust has started.
Specifications
- Product: Rust-Oleum Specialty Farm & Implement Spray, model 280124
- Color: JD Green, gloss sheen
- Size: 12 oz aerosol
- Resin: Oil-modified alkyd
- Coverage: 6 to 7 sq ft per can
- Dry: Touch 2 to 4 h, handle 5 to 9 h; recoat within 1 h or after 48 h
- Application temperature: 50 to 90 degrees F; not for galvanized metal
