Description
Hang heavy items on drywall and hollow block with the Service Tool 17 PC Spring-Wing Toggle Bolt Assortment - SAE. The hinged clear clamshell case sorts three bolt diameters into divided compartments, each pictured and counted on the Tool City label, so you can grab the right anchor for the load without digging through a drawer. Spring-wing toggles fold flat to pass through a drilled hole, then snap open behind the wall to spread the load across the back of the panel. Every bolt in this set is 3" long, which reaches through standard drywall and most hollow-wall cavities.
Key Features
- Three SAE diameters: 8 pcs 1/8" x 3", 6 pcs 3/16" x 3" and 3 pcs 1/4" x 3" spring-wing toggle bolts.
- Hollow-wall anchoring: the wings open behind drywall, plaster or hollow block where a plain screw would strip out.
- Divided clamshell case: hinged clear lid, one compartment per size and a hang hole for pegboard or truck storage.
- Labeled for restocking: size and count printed on the front so you know at a glance what is left after a job.
- About Service Tool: Service Tool Co. packs its Tool City house-brand fastener and hardware assortments in clear clamshell cases and backs them with the label promise of quality, value and satisfaction guaranteed.
How to Install It
Drill a hole large enough for the folded wings to pass through, then thread the bolt through your bracket or fixture before attaching the toggle, because the wings cannot come back out once they open. Pinch the wings flat, push the assembly through the wall, and pull back on the bolt as you tighten so the wings seat against the inside of the panel. Use the 1/8" bolts for towel bars, curtain rods and small shelves, the 3/16" size for closet rods and heavier brackets, and the 1/4" bolts for the loads that need the widest wing. Keep the case with your drill bits so the anchors are on hand when a stud is not where you need it.
Specifications
- Piece count: 17 spring-wing toggle bolts
- Sizes: 8 pcs 1/8" x 3", 6 pcs 3/16" x 3", 3 pcs 1/4" x 3"
- Thread standard: SAE (inch)
- Packaging: hinged clear clamshell case with divided compartments and hang hole
- Brand on label: Tool City; item number 13034
- Country of origin: China
Stop by Garoppo’s Stone & Garden Center and Feed & Pet Supply to see it in person and pick one up, or schedule local delivery within our service area.