Description
Seymour Stripe 3-Series is the inverted-tip ground marking paint contractors reach for when the layout has to go down fast and the lines have to stand up to the rest of the day. The water-based formula sprays clean from the inverted position so you mark from a natural standing stance — no bending, no overspray on your boots — and the patented Stripe 3 technology cuts the environmental impact roughly in half compared with solvent-based marking paint. Hits APWA color standards, dries to the touch in about an hour, and stays vivid through dust, foot traffic, and weather. Available in White for general layout and Fluorescent Blue for APWA potable-water utility locates.
Why Stripe 3-Series Is the Locator’s Standard
- Inverted spray, natural stance: Mark walking forward — no kneeling, no awkward wrist angles on long runs
- APWA color compliant: Match the standard utility color code for locates and jobsite layout
- Patented water-based technology: Cuts environmental impact about 50% vs. solvent-based marking paint, with HAPs content under 1%
- Fast-drying: Tack-free in about 1 hour — less smear, less foot-tracking, faster handoff to the next crew
- Non-clog nozzle: Less downtime priming the tip, less wasted can
- Safe on grass: Mark turf for landscape layout or event grids without scorching the green
- Wand & gun compatible: Works freehand, with the Z-605 marking gun, or on a Z-606 marking wand
- Coverage: Up to ~500 linear feet per can on smooth surfaces
- 2-year shelf life — do not warehouse below freezing
Use Cases
Utility locates (water, gas, electric, telecom), excavation and trench limits, layout grids on concrete and asphalt, surveying and stakeout marks, paving and curb cuts, parking-lot striping notes, golf-course tee/green marks, landscape bed outlines on turf, fencing lines, mining and quarry callouts.
Specifications
- Manufacturer: Seymour of Sycamore (Stripe 3-Series)
- Type: Water-based inverted ground marking spray paint
- Finish: Flat
- Net weight: 15 oz / can
- Dry time: ~1 hour to touch
- Coverage: ~400–500 linear feet per can
- HAPs content: <1%
- Available colors: White (item 20-352, UPC 043281008273); Fluorescent Blue, APWA potable water (item 20-369, UPC 043281008358)
- Origin: Made in the USA
Shake well, prime the tip, and spray with the can inverted in steady passes. Cap after use; store at moderate temperatures.