SRW Products CDX Cleaner & Degreaser X-Treme Specialty Clean

Lift the toughest hardscape stains — grease, oil, tar, gum, rubber, and paint — with the SRW Products CDX Cleaner & Degreaser X-Treme Specialty Clean. This concentrated, fast-acting spot treatment penetrates deep into concrete, paver, and masonry surfaces, breaks the bond between the contaminant and the substrate, and rinses clean with water. Restore high-traffic driveways, walkways, dumpster pads, shop floors, and patios before resealing or as routine maintenance.

Model #: SCDX QRT · Available in: 1 Quart

Specifications

• Type: Concentrated exterior cleaner-degreaser — spot treatment
• Form: Liquid — ready to use
• Coverage: Spot treatment — coverage varies by stain depth, porosity, temperature, and soil load
• Suitable for: Concrete, concrete pavers, brick, masonry, retaining walls, jobsite equipment housings
• Removes: Petroleum oil, grease, tar, gum, rubber tire marks, paint splatter
• Application Tools: Pump sprayer, mop, or brush; stiff bristle brush for agitation; pressure washer for rinse
• Application Temperature: 50°F–80°F (10°C–27°C)
• Storage: Cool, dry, well-ventilated area — KEEP FROM FREEZING

Why CDX Cleaner & Degreaser X-Treme?

• X-Treme strength: concentrated formula handles years-old, set-in stains that lighter cleaners can’t touch
• Rinses with water: no special solvent cleanup — rinse residue away with a pressure washer or hose
• Hardscape-ready: formulated for concrete, paver, and masonry surfaces — not just garage floors
• Reseal-prep ready: clears contaminants that interfere with sealer adhesion and produce uneven gloss
• Versatile application: apply by pump sprayer, mop, or brush — agitate, dwell, then rinse
• Job-ready quart: 1-quart bottle fits punch lists and small batch repairs without wasting product

Application

1. Read the label and SDS before starting. Test in an inconspicuous area to confirm desired results.
2. Pre-wet adjacent landscaping and protect plants and metals from overspray and runoff.
3. Apply CDX to the stain and allow the solution to penetrate. Let soak for 5–10 minutes — do not let the product dry on the surface.
4. Scrub the surface with a stiff bristle brush to lift the contaminant.
5. Pressure-rinse the surface multiple times to remove all residue.
6. Before resealing: follow with an SRW general-purpose cleaner (PW Paver Wash or DW Dual Wash), then wait 24 hours before applying an SRW sealer.

What Not to Use It On

• Marble or travertine
• Sealed surfaces (strip the sealer first with SS Sealer Stripper)
• Plastic, plastic-composite materials, rubber, or fiberglass

Safety

Wear gloves and eye protection. Work in shade on cool, dry surfaces; protect adjacent vegetation and metals from overspray. Follow local regulations for containment and runoff. Keep from freezing — freezing damages the formulation. For full chemical, application, and safety information, see the CDX Cleaner & Degreaser X-Treme Technical Data Sheet and Safety Data Sheet.