SRW Products LG Low Gloss Paver Sealer

Bring out the deep, natural color of your hardscape with the SRW Products LG Low Gloss Paver Sealer — a water-based, color-enhancing low-gloss acrylic film sealer that locks in joint sand, blocks weed growth and ants, and shields concrete pavers, manufactured stone, and natural-stone surfaces from salt, freeze/thaw cycles, and UV. Available in a 1-gallon jug for accent walls and small patios or a 5-gallon pail for full driveways and contractor jobs.

Model #: SSPS (1-gallon jug) / SSPS 5GAL (5-gallon pail) · Available in: 1 Gallon or 5 Gallons

Specifications

• Type: Water-based low-gloss film-forming acrylic sealer
• Finish: Low-gloss, color-enhancing (deepens paver tones)
• Coverage: 150 sq ft per 1-gallon jug · 750 sq ft per 5-gallon pail (150 sq ft / gallon)
• Suitable for: Concrete pavers, marble/travertine, limestone, block retaining walls, manufactured stone
• Not for use on: Clay pavers/brick, granite, bluestone, slate, wetcast concrete, hydrostatic-pressure or permeable surfaces
• Interior / Exterior: Both
• VOC: 174 g/L
• Specific Gravity: 1.01
• Application Temperature: 50°F–80°F (10°C–27°C)
• Dry Times: Tack-free 25 min · Foot traffic 24 hr · Vehicle traffic 72 hr
• Coats: Single coat for low-gloss finish; apply a second coat 4+ hours later for a deeper sheen
• Application Tools: Slit foam roller and sprayer (spray then back-roll for best results)
• Cleanup: Soap and water
• Storage: Keep from freezing; store in a cool, well-ventilated place
• Shelf Life: Use within 1 year of manufacture
• HMIS Rating: Health 2 · Flammability 0 · Reactivity 0 · Protection B (gloves + goggles)
• DOT Shipping: Not regulated

Why Use a Low-Gloss Color-Enhancing Sealer?

• Deepens and enriches paver color without a high-gloss shine
• Stabilizes joint sand — prevents washout, weed germination, and ant infestation
• Adds UV protection that slows fading on sun-exposed patios and walkways
• Resists salt and freeze/thaw damage on driveways and walkways
• Easier maintenance: stains, dirt, and water rinse off cleanly

Which Size Should I Buy?

• 1 Gallon (covers 150 sq ft) — small patios, accent walls, retaining-wall caps, touch-ups, contractor service calls
• 5 Gallons (covers 750 sq ft) — full driveways, large patios, multi-room paver installs

Application

1. Wait 28 days after installing polymeric sand before sealing.
2. Clean and prep the surface with an SRW General Purpose Cleaner; spot-treat stains with the appropriate Specialty Clean product.
3. Wait 24 hours after cleaning so the surface and joints are completely dry.
4. Stir thoroughly. Apply with a slit foam roller and sprayer — spray, then back-roll. Two-person application is recommended.
5. Start at the highest elevation and work downhill. Do not allow sealer to pool on pavers or in joints.
6. Cure for 24 hours; protect from rain. Vehicle traffic after 72 hours.

Tip: A light purple/amber color is common during the curing period and clears as the film sets. For added slip resistance on pool decks and stair treads, top with SRW SR Slip-Resist.

For full chemical, application, and safety information, see the LG Low Gloss Paver Sealer Technical Data Sheet and Safety Data Sheet (SDS).