SRW Products PS Penetrating Paver Sealer

Lock in the natural look of your hardscape with the SRW Products PS Penetrating Paver Sealer — a water-based penetrating sealer that protects concrete pavers, clay pavers, retaining walls, firepits, and natural stone from water intrusion, deicing salts, freeze/thaw cycles, and acid rain without changing the color or sheen of the surface. Available in a 1-gallon jug for small jobs and touch-ups or a 5-gallon pail for full driveways and patios.

Model #: SSPSPLUS (1-gallon jug) / SSPSPLUS 5GAL (5-gallon pail) · Available in: 1 Gallon or 5 Gallons

Specifications

• Type: Water-based penetrating sealer
• Finish: Invisible / natural-look (no sheen)
• Coverage: 200 sq ft per 1-gallon jug · 1,000 sq ft per 5-gallon pail (200 sq ft / gallon)
• Suitable for: Concrete pavers, clay pavers, concrete permeable pavers, retaining walls, firepits, manufactured stone, natural stone, wood, metals
• Not for use on: Limestone, areas with hydrostatic pressure
• Interior / Exterior: Both
• VOC: 314 g/L (CARB compliant)
• Application Temperature: 50°F–80°F (10°C–27°C)
• Dry Times: Tack-free 25 min · Foot traffic 24 hr · Vehicle traffic 72 hr
• Application Tools: Slit foam roller and sprayer (spray then back-roll for best results)
• Cleanup: Soap and water
• Storage: Keep from freezing; store in a cool, well-ventilated place
• Shelf Life: Use within 1 year of manufacture
• DOT Shipping: Not regulated

Why Use a Penetrating Sealer?

• Minimizes salt and freeze/thaw damage on driveways and walkways
• Resists efflorescence, acid rain, and chemical erosion
• Breathable — lets the substrate release trapped moisture
• Easier maintenance: stains, dirt, and water rinse off cleanly
• Retains the original color and texture of the paver

Which Size Should I Buy?

• 1 Gallon (covers 200 sq ft) — small patios, walkways, retaining-wall caps, touch-ups, contractor service calls
• 5 Gallons (covers 1,000 sq ft) — full driveways, large patios, multi-room paver installs

Application

1. Wait 28 days after installing polymeric sand before sealing.
2. Clean and prep the surface with an SRW General Purpose Cleaner; spot-treat stains with the appropriate Specialty Clean product.
3. Wait 24 hours after cleaning so the surface and joints are completely dry.
4. Stir thoroughly. Apply with a slit foam roller and sprayer — spray, then back-roll. Two-person application is recommended.
5. Start at the highest elevation and work downhill. Do not allow sealer to pool on pavers or in joints.
6. Cure for 24 hours; protect from rain. Vehicle traffic after 72 hours.

For full chemical, application, and safety information, see the PS Penetrating Paver Sealer Technical Data Sheet and Safety Data Sheet (SDS).