Techniseal Paint, Tar & Rubber Stain Remover


Size: 1 QT
Price:
$27.99

Description

Erase the stains that ordinary cleaners can't touch with Techniseal Paint, Tar & Rubber Stain Remover — a professional-grade solvent cleaner that dissolves paint, tar or bitumen, rubber scuffs, and chewing gum from pavers, slabs, concrete, and masonry. When a careless paint job, a hot summer tire mark, or roadwork splatter mars your hardscape, this water-rinsable remover lifts the stain without lifting the pavers.

Part of Techniseal's professional 3-Step System (Prepare, Clean, Protect), this remover handles driveways, patios, terraces, commercial parking lots, and pedestrian areas. It works on nearly every hard surface in the yard: concrete and clay pavers, wet cast and interlocking pavers, slabs, brick, natural stone, and poured or stamped concrete.

Key Features

  • Dissolves Tough Stains: Removes paint, tar and bitumen, rubber marks, and chewing gum.
  • Wide Surface Range: Safe on pavers, slabs, concrete, brick, natural stone, and masonry when used as directed.
  • Water-Rinsable: No special neutralizer needed — just rinse thoroughly when the stain is gone.
  • Professional 3-Step System: The stain-removal step in Techniseal's Prepare, Clean, Protect hardscape care program.
  • Contractor Trusted: The same remover hardscape pros use before cleaning and resealing.

How to Use

Wear protective clothing and always test on a small hidden stain first. Work on a surface that is dry and warm to the touch. Cover the stain generously with remover and let it work for 5 to 10 minutes. Reapply, then scrub with a small nylon brush until the stain dissolves. Do not let the product dry — rinse immediately and thoroughly. Note that this remover dissolves sealants, so plan to apply a fresh coat of sealant to the stripped area. See the Technical Data Sheet under Documentation for complete directions.

Specifications

  • Brand: Techniseal
  • Size: 1 quart
  • Removes: Paint, tar, bitumen, rubber, chewing gum
  • Surfaces: Concrete pavers, slabs, brick, natural stone, poured, stamped and interior concrete, masonry
  • Cleanup: Water-rinsable
  • Documentation: Technical Data Sheet and Safety Data Sheets available under Documentation

Stop by Garoppo's Stone & Garden Center and Feed & Pet Supply to grab a can before your next hardscape cleanup, or schedule local delivery within our service area.

It dissolves paint, tar and bitumen, rubber marks, and chewing gum from pavers, slabs, concrete, brick, natural stone, and masonry.
Test on a small hidden stain first. Cover the stain generously, let it work 5 to 10 minutes, reapply and scrub with a small nylon brush, then rinse immediately. Never let it dry on the surface.
Yes — this product dissolves any sealant it contacts. After removing the stain, apply a new coat of sealant to the stripped area.
No. The remover is water-rinsable — just rinse the treated area thoroughly with water as soon as the stain dissolves.
Yes. Unlike acid-based cleaners, it is formulated for pavers, slabs, poured concrete, stamped concrete, brick, natural stone, and masonry. Always test a hidden spot first.

You may also like

Recently viewed