Description
Lift embedded oil and grease stains from concrete pavers, slabs, and retaining walls with the Techniseal Pro-Grade Oil & Grease Stain Remover. This professional-grade industrial-strength formula goes on as a liquid, dries to a powder, and pulls petroleum-based contamination out of the substrate as the powder absorbs the released oil — giving you a clean sweep-up at the end instead of a messy rinse-down. Quick and easy to apply, won’t damage or discolor the substrate.
Product Code: 60300025 · Available in: 1 Quart bottle
How It Works
- Apply as a liquid: the formula penetrates into the porous substrate where the oil sits
- Lifts embedded contamination: the active chemistry breaks the bond between the oil and the substrate
- Dries to a powder: as the carrier evaporates, the powder absorbs the released oil
- Sweep up clean: remove the contaminated powder with a broom — no flooded rinse needed
What It Removes
- Engine oil and motor oil drips on driveways and parking pads
- Hydraulic fluid, transmission fluid, and other petroleum-based fluids
- Cooking grease (residential entertainment areas, restaurant patios)
- Embedded grease that ordinary degreasers can’t lift
Specifications
- Type: Professional-grade industrial-strength oil and grease stain remover
- Application Method: Liquid that dries to a powder (poultice-style absorption)
- Suitable for: Concrete pavers, concrete slabs, retaining walls, brick, natural stone, interior concrete, interlocking pavers, poured concrete, stamped concrete, wet-cast pavers
- Coverage: Apply as needed — spot-treatment product, coverage varies by stain depth
- Application Tools: Pour or brush onto stain; sweep up dried powder
- Storage: Cool area, cap firmly in place
- Substrate Safety: Won’t damage or discolor the surface
Why This vs Standard Degreaser?
- Pulls oil out of pores — standard degreasers wash the surface; this product reaches into the substrate where the oil sits
- No flood rinse — the powder cleanup is faster and cleaner than mopping a degreaser job
- Professional formulation — the choice for hardscape contractors handling years-old set-in stains
- Substrate-safe — won’t etch concrete the way muriatic-acid based cleaners can
Application
- Test in an inconspicuous area first to confirm desired results.
- Apply directly to the oil or grease stain per label directions. The product should fully wet the stained area.
- Let dry until the liquid has converted to a powder layer on the stain (cure time per the technical data sheet).
- Sweep up the contaminated powder with a stiff broom into a dustpan. Dispose per local regulations — petroleum-contaminated waste is regulated in many jurisdictions.
- Repeat on stubborn or deeply embedded stains.
- Optional: follow with a Techniseal Paver Prep cleaner before resealing.
Tips
- Wear gloves and eye protection when applying
- Best used on bare (unsealed) substrates — sealed surfaces should have the sealer stripped first
- Older stains may need 2–3 applications for full removal
- For full chemical, application, and safety information, refer to Techniseal’s technical data sheet from your dealer
It lifts and absorbs embedded oil and grease as it dries from a liquid to a powder — once dry, you simply sweep away the powder along with the stain.
Concrete pavers, slabs, and retaining walls, plus natural stone, brick, interior concrete, and poured or stamped concrete.
No. It is an industrial-strength formula that works without damaging or discoloring the material.
Pour it over the stain, let it dry to a powder, then sweep it up. Repeat for older, deeply embedded stains. Full directions are in the Technical Data Sheet under Documentation.
Yes — it draws out penetrated petroleum-based products, though set-in stains may need more than one application.